How To Install Aux Input In Car Stereo

How practice I put an AUX input in my car?

You can use an RCA-aux adapter to install aux input in the auto stereo if information technology has RCA ports. Otherwise, y'all can mount the aux input jack to the CD changer of the stereo by soldering its wires to the changer plug's ground, left, and right pins.

Table of Contents

• How do I put an AUX input in my auto?
• What You lot Will Need to Follow This Tutorial
• Use an RCA-aux cable/adapter
• Install an unabridged aux input jack
  • Identify the CD Changer Pinout of the Stereo
  • Solder the Aux Input Jack
  • Mount the Jack on the Dash
  • Test
• Decision

Aux input has get a staple feature of modernistic auto stereo systems. However, manufacturing plant-fitted stereos in former vehicles don't have one, and hence, y'all can't play your prison cell phone or mp3 player playlist on those audio systems.

If you don't want to become rid of your classic stereo but likewise want to play hundreds of tracks from your portable device on your auto speakers without burning CDs, you need to know how to install an aux cord in a auto stereo.

Hither, we will guide you on how to add an auxiliary input to your car's stereo without going to an audio shop.

What You Will Need to Follow This Tutorial

• RCA-aux adapter/cable
• Aux input jack
• Soldering fe
• Soldering wire
• Drill machine

Depending on the stereo installed in your motorcar, you accept 2 options to install aux input.

• Use an RCA-aux cable/adapter
• Install an entire aux input jack

Employ an RCA-aux cable/adapter

If your stereo has RCA inputs (cheque its dorsum), the installation of aux input gets pretty simple. All you need is a readymade adapter cable. Plug its two RCA input jacks in the stereo, and use its 3.5mm pivot as your aux input.

However, if at that place are no RCA inputs in the stereo, the installation procedure becomes a bit complex. Now, you take to solder an aux input jack into the stereo system. Permit'due south have a expect at the steps you will need to follow.

Install an unabridged aux input jack

Place the CD Changer Pinout of the Stereo

After removing the stereo from the nuance, you have to locate its CD changer and its pinout. Here, a bit of inquiry is needed. You have to refer to the manual of your car stereo. You tin can also run online searches to find the layout and the exact pivot location on the CD changer used in your stereo system. Your goal is to identify the ground, left, and right channel pins on the pinout.

Solder the Aux Input Jack

A standard aux input jack has a 3.5mm male jack on ane finish and 3 dissimilar colour wires on the other end. You have to solder those three wires to the three pins of the CD changer afterward identifying them in the earlier step. The black wire will be soldered to the ground indicate ground pin, the red one will exist soldered to the right aqueduct, and the white or yellow wire will exist soldered to the left channel.

If y'all are using the soldering iron for the offset time, have some warm-upwards and a practice session beforehand. Accept a simple plastic board, marking small dots on it with a pen/marker, and betoken those dots with the soldering wire through the solder. Subsequently making the authentic dots, proceed to solder the aux wires to the CD changer plug.

Mountain the Jack on the Dash

After successful mounting of the wires with the CD changer plug, you have to fix the male jack of the aux input on the nuance in a way where you lot can easily use it to plug in your devices. You might have to drill a slot in the dash to mount the jack. Choice the spot for the drilling carefully, and make certain there is nothing behind the spot where you will drill.

Test

Before putting the head unit of measurement dorsum and reinstalling the dash, you should exam the aux input. If the stereo starts playing audio input from your telephone/mp3 player, fit the head unit of measurement in its docking crenel and pack the dash components. Otherwise, troubleshoot the problem, and go a car sound expert on lath.

Conclusion

We promise that this "how to install aux input in a car stereo guide" helps you expand your old car stereo's functionality. If y'all like this article, don't forget to share it with swain automobile owners driving the sometime models with stock stereos. If y'all have any queries, shoot them abroad in our comment department.

Last update on 2022-03-12 / Chapter links / *Prototype Disclaimer: We use images/data from Amazon Product Advertising API solely on products that link to Amazon. On products with the "Price at Crutchfield" button, we utilize images/data from Crutchfield.com equally per the partnership bargain.

Source: https://99carstereo.com/how-to-install-aux-input-in-car-stereo/

Posted by: hestermartenow.blogspot.com

Share this post