How To Repair A Lamp Socket

After a long menstruum of utilize, the socket in a lamp can stop working. This can exist caused by the socket itself wearing out. Sometimes the socket is even so functional, but the switch has failed. Both of these issues can exist remedied past replacing the socket assembly.

Unplug the lamp and remove the shade and light bulb.

Once these take been fix aside, y'all can kickoff the procedure of removing the quondam socket. On many lamps, this will require that yous supercede the entire assembly including the switch. Yous need to examine the socket to run into how it is attached to the lamp.

Wait for a screw on the part of the socket that attaches to the tube running through the lamp.

On most lamps sockets, there is set screw that holds the socket to the conduit that allows the wire to laissez passer through the trunk of the lamp. Y'all demand to remove this screw. Before you unscrew the socket from the top of the lamp, grip the socket just higher up the switch. Pull upward while rocking the socket gently dorsum and forth. You lot should run across the socket starting time to pull apart.

Within the socket, yous will come across two wires coming out of the lamp.

If these wires are too short to permit you to elevator the upper function of the socket complimentary, you will need to remove the covering from the lesser of the base of operations of the lamp. Inside the base of the lamp, you will demand to release the wire so that it tin can freely motion up into the lamp trunk. This may require y'all to untie a knot in the wire and or remove a fitting from the base of the lamp.

Once the wire is loosed from the base of the lamp, the socket should come autonomously.

If you cannot get the socket to dissever from top to lesser, y'all may have to remove the unabridged socket from the lamp before proceeding. If the socket separates with no problem, loosen the two screws on the inside of the socket and remove the wires. Unscrew the rest of the assembly from the lamp.

Accept the new socket associates apart.

Feed the cease of the lamp wire through the lesser of the assembly. Screw the this part onto the conduit of the lamp. Use the set screw to fasten information technology in place. Wrap the end of one wire effectually each screw on the upper part of the assembly. Tighten the screws to make a firm connection. Push button the top of the socket assembly back into the bottom. Be careful to feed the wire back down through the body of the lamp as you do this.

Reassemble the base of the lamp.

Put the wire back in the base in the aforementioned way that yous found information technology when you removed the bottom of the lamp base. Put the bottom of the base back into place. Reinstall the light bulb and shade. You should exist ready to plug the lamp in and outset to employ information technology.

Source: https://www.stepbystep.com/Home-Repair-How-to-Replace-the-Light-Socket-in-a-Lamp-122836/

Share this post